81150A gives you a precise 120 MHz Pulse Generator and a versatile 240 MHz, 2 GSa/s Function Arbitrary Waveform Generator and a 120 MHz Noise Generator for the price of a Pulse Generator. 81150A Pulse Function Arbitrary Noise Generator is designed for today's and tomorrow's test challenges. It provides signal quality combined with a huge number of different signals like pulse, sine, square, ramp, noise and arbitrary waveforms. Whatever signals you need you either have it as part of the instrument or on a PC with the proven IntuiLink software. Capturing waveforms from a scope and downloading into the 81150A is easily possible. The 2 channel version allows coupling / uncoupling the channels so that you can generate signals with a defined delay or the channels work entirely independent. The channel add function allows you to add a distorted signal from one channel to a clean signal from the other channel. The modulation capabilities like FM, AM, PM, FSK, PWM up to 10 MHz combined with the noise functionality allows you to create real-world signals, simple and fast. The selectable crest factor (Vpeak/RMS) allows you to jitter tolerance testing under real world conditions and the 26 days repetition rate guarantees you random noise.

The Agilent Technologies 34420A nanoVolt/micro-Ohm meter is a high-sensitivity multimeter optimized for performing low-level measurements. It combines low-noise voltage measurements with resistance and temperature functions, setting a new standard in low-level flexibility and performance.

The 33600A Series waveform generators offer the common signals and features you expect, such as modulation, sweep and burst. However, it also offers features that give you the capabilities and flexibility you need to get your job done quickly, no matter how complex. An intuitive front-panel user interface, for example, can be quickly and easily relearned when your attention has been focused elsewhere. Built-in LAN, USB and optional GPIB interfaces allow you to easily control your instruments or transfer waveforms to your instrument. And that’s just the beginning. The 33600A Series waveform generators offer a variety of capabilities you can’t find anywhere else—capabilities designed to help you accelerate your testing and get your project wrapped up faster.

The E4980A precision LCR meter provides the best combination of accuracy, speed, and versatility for a wide range of component measurements. Offering fast measurement speed and outstanding performance at both low and high impedance ranges, the E4980A is the ultimate tool for general R&D and manufacturing test of components and materials. LAN, USB and GPIB PC connectivity enhances your design and test productivity. 

AVTECH High Voltage Amplifiers

The AV-110 family of variable-gain linear amplifiers is designed for driving high impedance loads with peak-topeak output voltages as high as 1000 Volts.

The AV-151 series is a family of high-voltage (or, for the AV- 151F, high-current) function generators and variable-gain amplifiers. All models include both an internal oscillator that can generate sine, triangle, and square waves, and a variablegain amplifier mode, which permits generation of more complex high-voltage waveforms.

Model 23 Shock Test System

The Model 23 Shock Test System is an extremely versatile testing machine. When equipped with a high strength aluminum shock table, it can perform a wide variety of programmable shock tests. When outfitted with optional platens or impact forms, the Model 23 can also perform materials impact evaluation (e.g. cushion testing) or artificial turf testing.

The Model 23 includes a TouchTest Shock 2 Table Top Control Console. TTS2 makes operating your shock system easy and safe. TTS2 communicates seamlessly with Test Partner Data Acquisition Systems

The SR560 is a high-performance, low-noise preamplifier that is ideal for a wide variety of applications including low-temperature measurements, optical detection, and audio engineering.

The SR844 is the widest bandwidth lock-in amplifier available. It provides uncompromised performance with a frequency range of 25 kHz to 200 MHz and up to 80 dB of drift-free dynamic reserve. The SR844 includes the many features, ease of operation, and programmability that you've come to expect from SRS DSP lock-in amplifiers.

The Agilent N9320B spectrum analyzer is a portable, swept spectrum analyzer with a frequency range of 9 kHz to 3.0 GHz. It can be a fundamental component of an automated system. It can also be widely used in an electronic manufacturing environment and in functional/final/QA test systems.

The 4294A precision impedance analyzer is an integrated solution for efficient impedance measurement and analysis of components and circuits. The 4294A covers a broader test-frequency range (40 Hz to 110 MHz) with Basic impedance accuracy:+/-0.08 %. Excellent High Q/Low D accuracy enables analysis of low-loss components. The wide signal-level ranges enable device evaluation under actual operating conditions. The test signal level range is 5m V to 1 Vrms or 200 uA to 20m Arms, and the DC bias range is 0 V to +/-40 V or 0m A to +/-100m A. Advanced calibration and error compensation functions eliminate measurement error factors when performing measurements on in-fixture devices. The 4294A is a powerful tool for design, qualification and quality control, and production testing of electronic components. Circuit designers and developers can also benefit from the performance/functionality offered.

Vector network analysis (VNA) is one of the most essential RF/microwave measurement approaches. One generator can feed two test ports simultaneously. This makes parallel measurements possible, significantly increasing performance despite the complexity of the measurement task at hand. In particular, multiport measurements such as performed on balanced SAW filters, duplex filters or antenna switching modules can be completed very quickly.

Agilent’s E5071C ENA network analyzers deliver new standards in speed, accuracy and versatility for RF network analysis. Designed with a wide range of measurement capability to meet multiple network analysis needs, the ENA offers efficiency and flexibility for both manufacturing and R&D applications in industries such as wireless communication, automotive, semiconductor, and medical.

Model 626 is a Deep Access, Long Reach Wire Bonder that can operate as a Ball, Wedge, Bump or Peg bonder. The 626 can be used for wire diameters from 0.7 to 2.0 mil (18 to 51µm) gold wire when in ball bonder configuration or 0.5 to 3.0 mil (12 to 76µm) and ribbon up to 1.0 x 12.0 mil (25 x 300µm) when in wedge or Peg bonding mode.

The NewView™ 7300 white light interferometer (profilometer) is a powerful tool for characterizing and quantifying surface roughness, step heights, critical dimensions, and other topographical features with excellent precision and accuracy. All measurements are nondestructive, fast, and require no sample preparation. Profile heights ranging from < 1 nm up to 20000 µm at high speeds, independent of surface texture, magnification, or feature height!

The OFV-5000 Controller is the core of Polytec’s latest state-of-the-art laser vibrometer systems. Its modular design allows the frequency, velocity and displacement capabilities to be tailored to your applications. Both analogue and digital decoders are available, giving a frequency range from near DC to 24 MHz, with velocities to ±10 m/s and displacements from the sub-nanometer to meter range. In combination with an interferometric sensor head of the OFV series, this is an ultra-precise workhorse for non-contact vibration measurement

The Micro System Analyzer is the premier measurement tool for the analysis and visualization of structural vibrations and surface topography in micro structures such as MEMS. By fully integrating a microscope with scanning laser doppler vibrometry, stroboscopic video microscopy and scanning white light interferometry, the Micro System Analyzer is designed with an all-in-one combination of technologies that clarifies real microstructural response and topography

The jetlab® II is designed for the laboratory development of jetting processes and materials, allowing MicroFab’s customers and partners to investigate and optimize their specific applications.

Lab facilities